Z Microsystems ZX Station User Manual

Document# 27-0007UM Issued 11/00 Rev. 1.0FIELD-READYZ MicrosystemsZX STATIONUser ManualFIELD-READY

Document# 27-0007UM Issued 11/00 Rev. 1.0INSTALL THE ZX STATION IN CABINET FRAMEPull the two ZX Stationslides out until theylock.Hold the Z

Document# 27-0007UM Issued 11/00 Rev. 1.0FINAL ADJUSTMENTSInstall ZX Station11Slide the ZX Stationpartially out.Lift the ZX Station whiletightenin

Document# 27-0007UM Issued 11/00 Rev. 1.012Several cables connect the back ofthe ZX Station to other equipment,depending upon the ZX Stationinte

Document# 27-0007UM Issued 11/00 Rev. 1.0POWERING UPSwitch the ZX Station onby pushing and releas-ing the power switchlocated on the right ofthe ce

Document# 27-0007UM Issued 11/00 Rev. 1.014OperationTRANZPAK 6The rugged TranzPak 6is a removable massstorage system.TranzPak 6 provides4.5GB

Document# 27-0007UM Issued 11/00 Rev. 1.015OperationTRANZPAK 6FRONT PANELThe front panel of the TranzPak 6contains three LEDs, a SCSI IDindica

Document# 27-0007UM Issued 11/00 Rev. 1.0OperationTRANZPAK 616FUNCTION SWITCHThe function switch has multiplefeatures and is used for a variety oft

Document# 27-0007UM Issued 11/00 Rev. 1.017FRONT PANEL FUNCTIONINGThe following Table describes thefunctioning of the TranzPak 6 diskmodules fro

Document# 27-0007UM Issued 11/00 Rev. 1.0OperationINSTALLING DISK MODULENOTE: The disk module can beinstalled with the diskmodule handle in any o

Document# 27-0007UM Issued 11/00 Rev. 1.019OperationPOWERING UP THE HARD DISKThe disk module handle is the on/offpower switch for the hard disk

Document# 27-0007UM Issued 11/00 Rev. 1.021. Use the powerand videocables suppliedwith thisequipment tohelp preventinterference withradio andt

Document# 27-0007UM Issued 11/00 Rev. 1.020OperationFUNCTION SWITCH ELECTRICAL DESCRIPTIONThe function switch has four positions: Two Read/Write

Document# 27-0007UM Issued 11/00 Rev. 1.021OperationNOTE: Refer to the TranzPak 6 UserManual for details aboutsystem operations.LOCKING THE DISK

Document# 27-0007UM Issued 11/00 Rev. 1.0Operation22NOTE: Refer to the TranzPak 6 UserManual for details aboutsystem operations.OPERATING THE DIS

Document# 27-0007UM Issued 11/00 Rev. 1.0Operation23NOTE: Refer to the TranzPak 6 UserManual for details aboutsystem operations.CARRYING THE DISK

Document# 27-0007UM Issued 11/00 Rev. 1.0CLOSING THE ZX STATIONTo close the ZX Station, reverse the above steps:24One of the many design features

Document# 27-0007UM Issued 11/00 Rev. 1.025CLEAN FRONT PANELWARNING: Be sure to turn off thepower before performing anymaintenance on the ZXStat

Document# 27-0007UM Issued 11/00 Rev. 1.026FRONT PANEL Power light does not illuminate Check that power cable is properlyconnected to 110 vac p

Document# 27-0007UM Issued 11/00 Rev. 1.027The exact specifications may vary, depending on the combination of compo-nents ordered for the ZX Station

Document# 27-0007UM Issued 11/00 Rev. 1.0AppendixWARRANTY281 Year Extended WarrantyExtent of Limited Warranty1. Z Microsystems, Inc. (Z Micro) warra

Document# 27-0007UM Issued 11/00 Rev. 1.0WARRANTY29AppendixUnited States, as well as some governments outside the United States(including provinces

Document# 27-0007UM Issued 11/00 Rev. 1.0STARTING POINT 4Shipment Contents 4User Manual 4Product Description 5Drawing of Slide Installation 6Tools

Document# 27-0007UM Issued 11/00 Rev. 1.0AppendixWARRANTY30How long does it take? Your equipment should be returnedto you within 30 days of its rece

Document# 27-0007UM Issued 11/00 Rev. 1.0Z Microsystems has achieved full Y2K Compliance.In late 1997, the companys senior management assigned a Y2

Document# 27-0007UM Issued 11/00 Rev. 1.0SupportNOTE: If possible, stay by thecomputer. The Z MicrosystemsTechnical Support Representa-tive m

Document# 27-0007UM Issued 11/00 Rev. 1.0If the Z Microsystems TechnicalSupport Engineer determines that theproduct needs to be replaced, aCustomer

Document# 27-0007UM Issued 11/00 Rev. 1.0Z Microsystems, Inc.5945 Pacific Center Blvd., Suite 509San Diego, CA 92121Phone: (858) 657-1000Fax; (858

Document# 27-0007UM Issued 11/00 Rev. 1.0The User Manual comes in twoformats: printed hardcopy or CD-ROM. This Manual is also availableon the

Document# 27-0007UM Issued 11/00 Rev. 1.0PRODUCT DESCRIPTION5Starting PointThe ZX Station,with its ruggedremovable harddrive, is theultimate proces

Document# 27-0007UM Issued 11/00 Rev. 1.0Starting Point61. 4 Screws #10-32 x .75 Oval Hd Phil2. 4 Washer, Finishing, #10 SS3. 4 Washer # 10, Nylo

Document# 27-0007UM Issued 11/00 Rev. 1.0TOOLS REQUIREDPRECAUTIONS Required Tools and Equipment Phillips screwdriver with about 10"shaft. A

Document# 27-0007UM Issued 11/00 Rev. 1.0SLIDE REMOVALLay the ZX Station on aworkbench.The slide rail will reacha stop about half wayout.This is

Document# 27-0007UM Issued 11/00 Rev. 1.0Tighten the slide mountto the cabinet frame onthe back of the cabinetframe.Make sure to hold theslide moun